Oil and bitumen salt analyzer - automatic

NSB Tech

ASTM D3230

IP 265

Automatic model
Measurement in less than 30 seconds
Salt concentration values displayed automatically
Automatic selection of ASTM tables

Supplied with :

Cover with electrodes
Beakers with rings

Options and accessories

Calibration for IP standard
Specific temperature calibration
Calibration for salts in bitumen method at 20°C
Ticket printer
Carrying case
Calibration kit
Paper roll

Security

High level of safety
Operator protected by safety cover
Short-circuit prevention
Hall-effect sensor for power cut-off with cover open
Audible alarm during measurement
Indicator light

Software

Pre-set calibration at 3 different temperatures
Salt concentration values displayed (results in PTB, g/m3, mg/kg)
Automatic table selection based on sample temperature
Automatic measurement range adjustment
Interchangeable sensor
User calibration modes enable verification against user standards

Prerequisites

Power supply: 115V / 230V, 50/60 Hz, 1A
Dimensions (mm): (W) 250 x (D) 380 x (H) 290
Weight: 7kg

Summary

Determination of chloride concentration in crude oils: A method explained by ASTM D3230

This method is used to determine the chloride concentration (salts) in crude oils. The concentration range is 0 to 500mg/kg or 0 to 150lb/1000bl as chloride concentration/volume of crude oil.